
How to Hire Air Conditioner Sevice Professionals
How to Hire Air Conditioner Service Professionals
When your air conditioner needs more than the regular maintenance
described previously, hire a professional service technician. A
well-trained technician will find and fix problems in your air
conditioning system. However, not all service technicians are
competent. Incompetent service technicians forsake proper diagnosis and
perform only minimal stop-gap measures.
Insist that the technician do the following:
- Check for correct amount of refrigerant
- Test for refrigerant leaks using a leak detector
- Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere
- Check for and seal duct leakage in central systems
- Measure air flow through the evaporator coil
- Verify
the correct electric control sequence and make sure that the heating
system and cooling system cannot operate simultaneously
- Inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary
- Oil motors and check belts for tightness and wear.
- Check the accuracy of the thermostat.
When your air conditioner needs more than the regular maintenance described previously, hire a professional service technician. A well-trained technician will find and fix problems in your air conditioning system. However, not all service technicians are competent. Incompetent service technicians forsake proper diagnosis and perform only minimal stop-gap measures.
Insist that the technician do the following:
- Check for correct amount of refrigerant
- Test for refrigerant leaks using a leak detector
- Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere
- Check for and seal duct leakage in central systems
- Measure air flow through the evaporator coil
- Verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously
- Inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary
- Oil motors and check belts for tightness and wear.
- Check the accuracy of the thermostat.